Names of Parts
Remote Controller
Signal transmitter
•
To use the remote controller, aim the
transmitter at the indoor unit. If there
is anything to block signals between
the unit and the remote controller,
such as a curtain, the unit will not
operate.
•
Do not drop the remote controller. Do
not get it wet.
•
The maximum distance for
communication is approx. 6m.
Make sure that there are no
obstacles within 50cm under the
signal receiver.
Such obstacles, if any, may have an
adverse infl uence on the reception
performance of the receiver and the
reception distance may be
shortened.
FAN setting button
•
It selects the airfl ow rate setting.
POWERFUL button
•
POWERFUL operation.
7
01_EN_3P357704-1.indd 7
01_EN_3P357704-1.indd 7
Receiver
50cm
or more
Page 14
Page 18
Model
Display (LCD)
•
It displays the current settings.
(In this illustration, each section is
shown with its displays on for the
purpose of explanation.)
TEMPERATURE
adjustment buttons
•
It changes the temperature setting.
ON/OFF button
•
Press this button once to start
operation.
Press once again to stop it.
Front cover
•
Open the front cover.
ARC466A9
Page 12
Page 11
Page 8
12/17/2013 3:21:57 PM
12/17/2013 3:21:57 PM