Accuracy Check; Error Message; Maintenance And Service; Maintenance And Cleaning - Bosch GLM Professional 50-27 CG Manual Original

Ocultar thumbs Ver también para GLM Professional 50-27 CG:
Tabla de contenido

Publicidad

34 | English
Deactivating the Bluetooth® interface
Press the 
 button to bring up the Bluetooth® menu and press the 
deactivate the Bluetooth® interface.

Accuracy Check

Regularly check the accuracy of the grade measurement and distance measurement.
For more information, you can access the online operating instructions at
www.bosch-pt.com/manuals

Error Message

If a measurement cannot be performed correctly, the error message Error will appear in
the display.
Try to perform the measuring process again.
If the error message appears again, switch the measuring tool off and back on, and
start the measurement again.
The measuring tool monitors correct operation in every measurement. If a de-
fect is detected, the display will indicate only the symbol shown opposite and
the measuring tool switches itself off. In this case, have the measuring tool
checked by an after-sales service agent for Bosch power tools.

Maintenance and Service

Maintenance and Cleaning

Only store and transport the measuring tool in the protective bag provided.
Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.
Take particular care of the reception lens (15), which must be handled with the same level
of care you would give to a pair of glasses or a camera lens.
If the measuring tool needs to be repaired, send it off in the protective bag (18).
1 609 92A 6XT | (03.09.2021)
button again to
Bosch Power Tools

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Glm professional 50-27 c

Tabla de contenido