Selecting The Reference Level; Basic Settings Menu - Bosch GLM Professional 50-27 CG Manual Original

Selecting the Reference Level

For the measurement, you can select from various reference levels:
The rear edge of the measuring tool (e.g. when placing against walls)
The centre of the tripod thread (14) (e.g. for tripod measurements)
The front edge of the measuring tool (e.g. when measuring from a table edge)
For more information, you can access the online operating instructions at
www.bosch-pt.com/manuals

Basic Settings Menu

In the Basic settings menu, you can find the following basic settings:
– Changing the reference level (see "Selecting the Reference Level", page 31)
– Switching audio signals on and off
– Switching Vibration on and off
– Setting display brightness
– Switching on and off battery saver mode
– Changing the unit of measurement
– Setting the language
– Grade measurement calibration (see "Accuracy Check", page 34)
– Activating PRO360
– Calling up Device Information
– Factory settings
– Deleting Memory
Press the button to open the Basic settings menu.
Use the button or
To confirm a selection, press the
Bosch Power Tools
button to select the required setting.
button or the
English | 31
button.
1 609 92A 6XT | (03.09.2021)