Roadstar HIF-1899TUMPK Manual De Instrucciones página 10

5 English
DIRECT USB ENCODING
Remark:
Recording speed is 1:1.
•
No song title will be recorded during encoding mode.
•
To avoid damage to USB memory, remove it only when the radio is turned off.
•
ENCODE FROM PHONO AND CASSETTE:
1. Plug the USB stick into the [USB PORT] (1);
2. Perform normal playback of the source you want to encode & record;
3. Press the [RECORD] button (5) twice to start encoding. On the display will flash
"REC";
4. Once the record is finished, press the [STOP] button (14) to stop recording.
ENCODE FROM CD:
Encode 1 track:
1. Plug the USB stick into the [USB PORT] (1);
2. Perform normal playback of the track you want to encode & record;
3. Press the [RECORD] button (5) twice during the playback of the desired track.
The playback will stop and restart automatically and on the top of the display (6)
"USB" will flash. Encoding is performing now;
4. Press the [STOP] button (14) to finish recording the track.
Encode 1 disc:
1. Plug the USB stick into the [USB PORT] (1);
2. Perform normal playback of the CD you want to encode & record;
3. Press the [RECORD] button (5) twice after focus search completed;
4. The playback will start automatically and on the top of the display (6) "USB" will
flash. Encoding is performing now.
Note: After completing of encoding, unit will stop playback and encoding automati-
cally.
DELETE TRACKS FROM USB
1. Perform normal playback of the track you want to delete;
2. During playback of the track you want to delete, press the [DELETE] button (34)
on the remote control twice.