Possibilities Of Networking; Each Temperature Chamber Via Its Own Ethernet/Rs422-Rs485 Converter - Binder 8012-0380 Manual De Conexión

5.

Possibilities of networking

Depending on the local situation one of the following possibilities can be selected to connect the
controlling and evaluation computer to the temperature chambers.

5.1. Each temperature chamber via its own Ethernet/RS422-RS485 converter

Controlling and
monitoring -PC
e.g., with APT-COM™
Connection RJ45
Ethernet card
Ethernet
Notes: If the Ethernet/RS422-RS485 converter is already built-in in the temperature chambers
(optional), only the PATCH cable will be plugged into the Ethernet interface (RJ45 socket) of the
chamber. In this case the connection to the chamber controller is already established in a
similar way as described here.
The optional extension cable 50m (5023-0117) can be connected behind the 5m cable (5023-
0095).
Connection of Ethernet/RS422-RS485 converter 09/2016
PATCH cable Cable 5 m Art. No. 5023-0095,
optional: extension cable 50m
Art. No. 5023-0117
Ethernet
RS422/485
Ethernet
RS422/485
Ethernet
RS422/485
Ethernet
RS422/485
Ethernet/RS422-RS485
Converter
Telephone
dialing
device
Alarm
30
Box
3
KBF
BD
2
ED
FD
™
APT.line (E2)
1
KBF
Page 15/32