Hilti NURON SC 30WR-22 Manual De Instrucciones Original página 18

▶ If the battery is too hot to touch, it may be defective. Put the battery
in a place where it is clearly visible and where there is no risk of fire,
at an adequate distance from flammable materials. Allow the battery
to cool down. If it is still too hot to touch after an hour, the battery is
faulty. Consult Hilti Service or read the document entitled "Instructions
on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage
and use of lithium-ion batteries. → page 21
Read the instructions on safety and use of Hilti Li-ion batteries
that you can access by scanning the QR code at the end of these
operating instructions.
3 Description
3.1 Product overview
Spindle lock button
@
Auxiliary grip
;
Scaffold hook (optional)
=
Switch-on interlock
%
Main grip
&
On/off switch
(
Battery release button
)
Battery
+
Clamping lever for cutting
§
depth adjustment
LED line-of-cut light
/
Clamping lever for the fence
:
Knob, preset for cutting angle
∙
(22.5°, 45°, 50°)
3.2 Overview: Cutting angle adjustment
Scale for cutting angle adjust-
@
ment
Clamping lever for the fence
;
Clamping lever for cutting angle
=
adjustment
Knob, preset for cutting angle
%
(22.5°, 45°, 50°)
Cut marks (0°, 45°)
&
12 English
1
$
£
|
¡
Q
W
E
R
T
Z
U
I
Scale for cutting depth adjust-
ment
Guard
Direction-of-rotation arrow
Arbor
Mounting flange
Clamping flange
Clamping screw
Base plate
Operating lever for lower
guard
Hose connector for sawdust
extraction
Battery release button
Battery status indicator
2264108
*2264108*