Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
•
Check all visible parts and controls for signs of damage at regular
intervals and make sure that they all function correctly.
•
Do not use the product if signs of damage are found or if parts
malfunction. Immediately have the product repaired by Hilti Service.
•
After cleaning and maintenance, install all guards and protective devices
and check that they are in full working order.
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with your product can be found at your
Hilti Store or online at: www.hilti.group
7.1 Cleaning the safety guard
1. Remove the saw blade before cleaning the safety guard parts.
2. Clean the safety guard parts carefully with a dry brush.
3. Use a suitable tool to remove deposits or cuttings from the inside
surfaces of the safety guard parts.
4. Fit the saw blade.
7.2 Checks after cleaning and maintenance
After cleaning or maintenance, check that all safety devices are fitted
and that they function faultlessly.
▶ To check operation of the lower guard, use the operating lever to open
it fully.
▶ The lower guard must close quickly and completely when the oper-
ating lever is released.
8
Transport and storage of cordless tools and batteries
Transport
CAUTION
Accidental starting during transport !
▶ Always transport your products with the batteries removed!
▶ Remove the battery/batteries.
▶ Never transport batteries loose and unprotected.
batteries should be protected from excessive shock and vibration and
isolated from any conductive materials or other batteries that may come
in contact with the terminals and cause a short circuit. Comply with the
locally applicable regulations for transporting batteries.
▶ Do not send batteries through the mail.
instructions on how to ship undamaged batteries.
*2264108*
2264108
During transport,
Consult your shipper for
English
21
Publicidad
Tabla de contenido
