WABCO TEBS E Manual Del Usuario página 16

en
TEBS E
14
Replacing the TEBS E modulator
– Use an open-end spanner (size 13) to open the yellow clips on the slot on the
modulator and pull the plug back slightly.
– Then pull all cables that are plugged in from the modulator.
– Remove the following one after the other with an open-end spanner (size 22):
The control line (Ø 8 x 1), connection 4 on the modulator, the bellows line
(Ø 8 x 1), connection 5 indicated with a bellows symbol on the modulator.
– Use an open-end spanner (size 28) to remove the supply line (Ø 18 x 2), con-
nection 1, on the modulator.