ARIETE Blendy metal 560 Manual página 9

Turning the dial (E) anticlockwise will start the PULSE operating mode.
WARNING: If the appliance should fail to start, make sure that the goblet is correctly fitted. The
appliance is fitted with devices to prevent it from operating if the goblet is not fitted or if it has been
fitted incorrectly.
WARNING: NEVER EXCEED THE MAXIMUM OPERATING TIME OF 30 SECS. NEVER REMOVE
THE LID (B) DURING USE.
WARNING: Before blending warm liquids, always remove the filler cap (A) from the blender lid.
Never place hot liquids in the blender.
WARNING: Never leave the appliance on for more than 30 seconds. The ideal use is with brief pulse
operations for a few seconds each.
- To stop the appliance, turn the on dial (E) back to «0».
- It is possible to add foods to the blender goblet during use, by first lifting out the filler cap (A) after
switching off the appliance.
- It could become necessary to switch off the appliance several times in order to remove food resi- -
dues from the sides of the goblet. If this occurs, switch off the appliance and unplug it from the
mains power.
- Remove the filler cap and lid and use a spatula to remove any residues from the sides of the
goblet.
WARNING: KEEP THE SPATULA WELL AWAY FROM THE BLADE SET SO AS NOT TO CAUSE
ANY DAMAGE TO THE BLADES.
BLENDER DISASSEMBLY
- Unplug the appliance from the mains power socket before removing the goblet (C) from the
base.
- Pull the goblet off upwards (C) and remove the lid (B) and plug (A).
- Pour the smoothy into a glass.
CLEANING
WARNING
NEVER PLACE THE APPLIANCE BODY, PLUG OR POWER CORD IN WATER OR
:
OTHER LIQUIDS; ALWAYS WIPE CLEAN WITH A DAMP CLOTH.
WARNING ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY MAINS BEFORE
:
FITTING OR REMOVING SINGLE ATTACHMENTS OR BEFORE CLEANING THE APPLIANCE.
It is strictly prohibited to disassemble the appliance or try to intervene inside it in any way. Keep the
appliance clean and in order. This will guarantee excellently chopped foods and a longer useful life
for the appliance itself.
- The goblet (C), lid (B), and plug (A) can be washed in the top rack of the dishwasher.
- Use a slightly damp cloth to clean the power base.
Never clean with potentially abrasive products.
- Clean the blade with care.
WARNING: THE CUTTING EDGES OF THE BLADE SET ARE EXTREMELY SHARP.
- The appliance can be stored with the power cord wound around the cord winder in the base (Fig. 5).
All manuals and user guides at all-guides.com
-  -
E N