Stanley TLM50 Manual página 5

Turning Off the Tool
The tool can be turned off in either of these ways:
• Press and hold for 5 seconds (until the
display window clears).
• If you do not use the tool for 60 seconds, it will
automatically turn off.
Specifications
Range
Measuring Accuracy*
Resolution
Laser Class
Laser Wavelength
Auto Power Switch-off
Battery Life (2 x AAA)
Storage Temperature Range
Operating Temperature Range
Battery Life (2 x AAA)
Storage Temperature Range
Operating Temperature Range
*Measuring Accuracy depends on the current conditions:
Under favorable conditions (good target surface and room temperature) up to 10m (33ft).
•
Under unfavorable conditions (bright sunlight, a very weak reflecting target surface, or
•
large temperature fluctuations), the error can increase by ± 0.25 mm/m (± 0.003 in/ft) for
distances over 10m (33ft).
Warranty
Go to www.2helpU.com for the latest
warranty information..
TLM50
STHT1-77409
21cm to 15m
(8.3in to 50ft)
Typically ± 3.0mm (± 1/8in)*
1mm (1/16in)
Class 2 (IEC/EN60825-1: 2014)
620-690nm, Power < 1mW
After 60s
Up to 3000 Measurements
-10° C ~ +60 C (14° F ~ 140° F)
0° C ~ +40° C (32° F ~ 104° F)
Up to 3000 Measurements
-25 °C ~ +70 °C (-13° F ~ 158 °F)
0 °C ~ +40 °C (32 °F ~ 104 °F)
TLM100
STHT1-77410
21cm to 30m
(8.3in to 100ft)
GB
5