Annovi Reverberi BLUE CLEAN 1380 Traducción De Las Instrucciones Originales página 9

SAFETY RULES/RESIDUAL RISKS
3
3.1 SAFETY "DO NOTS"
3.1.1 W
. DO NOT allow children to use the machine; supervise them to ensure
arning
that they do not play with it.
3.1.2 W
. High pressure jets may be dangerous if incorrectly used.
arning
3.1.3 W . DO NOT use the machine with flammable or toxic liquids, or any
arning
products which are not compatible with its correct operation. Use of the
machine in a potentially inflammable or explosive atmosphere is forbidden.
3.1.4 W
. EXPLOSION HAZARD. DO NOT use the machine to spray flammable
arning
liquids.
3.1.5 W
. DO NOT point the water jet at people or animals.
arning
3.1.6 W . DO NOT point the water jet at the machine itself, electrical parts or
arning
other electrical equipment.
3.1.7 W . DO NOT use the machine with people within its range of action unless
arning
they are wearing protective clothing.
3.1.8 W . DO NOT point the jet at yourself or others to clean clothing or footwear.
arning
3.1.9 W
. DO NOT use the machine outdoors when it is raining.
arning
3.1.10 W
. The machine MUST NOT be operated by children, incompetent persons
arning
or anyone who has not read and understood the instructions.
3.1.11 W . DO NOT touch the plug and/or socket with wet hands.
arning
3.1.12 W
. DO NOT use the machine if the power cable is damaged. If the power
arning
cable is damaged, it must be replaced by the manufacturer, one of its Authorised
Service Centres or similarly qualified persons in order to avoid a safety hazard.
3.1.13 W
. DO NOT use the machine if a power cable or important parts such as
arning
the safety devices, high pressure hoses or trigger gun are damaged.
3.1.14 W
. DO NOT jam the gun trigger in the operating position.
arning
3.1.15 W
. Check that the data plate is affixed to the machine; if not, inform
arning
your dealer. Machines without data plates must NOT be used as they are
unidentifiable and potentially dangerous.
3.1.16 W
. DO NOT tamper with or adjust the setting of the regulating valve or
arning
the safety devices.
3.1.17 W
. DO NOT alter the original diameter of the nozzle jet.
arning
3.1.18 W
. DO NOT move the machine by pulling on the POWER CABLE.
arning
3.1.19 W . DO NOT allow vehicles to drive over the high pressure hose.
arning
English 9