Technical Data - FLORABEST FHT 600 A1 Traducción Del Manual De Instrucciones Original

GB MT
Justified guarantee claims should be re-
ported to our Service Centre (see page 57
for telephone & fax no.s, and email ad-
dress). Our Service Team will tell you more
about our complaints handling procedure.
The guarantee does not include damages
that are attributable to natural wear, over-
loading or inappropriate use. Certain com-
ponent parts are subject to normal wear
and are excluded from the guarantee. In
particular, cutter bars, eccentric drives and
carbon brushes are included here, provid-
ing the complaints cannot be attributed to
material defects.
Furthermore, a condition of the guarantee
services is that the maintenance intervals
indicated in the operating instructions
have been observed and the instructions
for cleaning, care and maintenance have
been followed. Damages due to material or
manufacturer faults will be repaired free of
charge by replacement delivery or repair.
However, this is conditional upon the unit
being returned complete and assembled to
our Service Centre, together with proof of
purchase and guarantee slip.
Repairs that are not covered by the guaran-
tee can be carried out by our Service Centre
for a fee. Our Service Centre will be happy
to provide you with a cost estimate. We
can deal only with equipment that has been
packaged correctly and which has been
sent to us with the correct postage paid.
Caution: The sender shall bear the cost of
any material damages during transport.
In case of complaint or for servicing, please
send your equipment cleaned and with an
indication of the defect, to our service ad-
dress.
Equipment sent in with freight collect
– by bulk freight, express or with other
special freight – are not accepted.
Defective units returned to us will be dis-
posed of for free.
42
All manuals and user guides at all-guides.com

Technical Data

Electrical Hedge Trimmer.... FHT 600 A1
Input voltage rating ..............230V~, 50 Hz
Input power . .................................... 600 W
Safety class ........................................ II
Protection category........................... IP 20
Knife movements per minutes ...........2960
Weight .............................................3.6 kg
Cutting length ...............................600 mm
Cutting capacity ..............................24 mm
Sound pressure level
(L ) ................... 84.4 dB(A), K
pA
Sound power level (L
guaranteed ...............................98 dB(A)
measured ......96.1 dB(A); K
Vibration (a )
n
at the handle ..... 2.248 m/s
at the bow handle . ..2.636 m/s
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).
=3 dB(A)
pA
)
wA
=1.9 dB(A)
wA
; K=1.5 m/s
2
; K=1.5 m/s
2
2
2