Emergency And Test Operation - Haier HSU-09RD03/R2 Manual De Funcionamiento

Operation

Emergency and Test Operation

Emergency operation:
Use this operation only when the remote
controller
is defective or lost.
When the emergency operation switch is
pressed,the" Pi "sound is heard once, which
means the start of this operation.
In this operation, the system automatically selects
the operation modes, cooling or heating, according
to the room temperature.
Temperature Operation
mode
COOLING
ABOVE 21 O C
BELOW 21 O C
HEATING
It is not possible to operate in dry mode.
Test operation:
Test operation switch is the same as emergency switch.
Use this switch in the test operation when the room
temperature is below 16
operation.
Continue to press the test operation switch for more
than 5 seconds. After you hear the "Pi" sound twice,
release your finger from the switch: the cooling
operation
starts with the air flow speed "Hi".
After 30 minutes, test operation ends automatically.
Removal of the restriction of emergency or test operation
Press the emergency operation switch once more, or manipulate through the
remote controller; the "Pi" sound, the emergency or test operation is
terminated.
When the remote controller is manipulated, it gets the system back to the
normal operation mode.
All manuals and user guides at all-guides.com
Timer
Designated
mode
temperature
NO
24 O C
NO
24 O C
O
C, do not use it in the normal
18
Air flow
AUTOMATIC
AUTOMATIC