Declaration Of Conformity - Worx WU303 Manual Del Usuario

PLUG REPLACEMENT (UK &
IRELAND ONLY)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
BLUE =NEUTRAL
Brown = Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
colored markings identifying the terminals
in your plug, proceed as follows.The wire
which is colored blue must be connected to
the terminal which is marked with N.The wire
which is colored brown must be connected to
the terminal which is marked with L.
Warning:Never connect live or neutral wires
to the earth terminal of the plug. Only fit an
approved 13ABS1363/A plug and the correct
rated fuse.
Note: If a moulded plug is fitted and has to be
removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
10 10
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Hammer Drill
13L-WU303-M-060919-·¨ÓïCE´¦ÐÞ¸Ä.indd 10
All manuals and user guides at all-guides.com
DECLARATION OF
CONFORMITY
We,
POSITEC Power Tools (Suzhou) Co., Ltd.
No. 11 Yangqing Road, Loufeng Area, Suzhou
Industrial Park, Jiangsu 215021, P . R. China
Declare that the product,
Description: WORX Hammer Drill
Type: WU303
Complies with the following Directives,
EC Machinery Directive 98/37/EC
EC Low Voltage Directive
73/23/EEC amended by 93/68/EEC
EC Electromagnetic Compatibility Directive
89/336/EEC amended by 93/68/EEC
Standards conform to
EN55014-1
EN55014-2
EN61000-3-2
EN61000-3-3
EN60745-1
EN60745-2-1
13 Amp fuse approved
to BS1362
Brown L (live)
2006/01/01
Cable grip
Jacky Zhou
POSITEC Quality Manager
ENG
2007-3-5 16:04:03