Festool CT-F I Manual De Instrucciones Original página 32

English
Switching on/off
Once the remote control is connected to
the mobile dust extractor, the mobile
dust extractor can be switched on and
off with the remote control.
► Activate the mobile dust extractor's
automatic mode.
► Press the MAN button on the remote
control [1-2] to switch the device on
and off.
If a mobile dust extractor which
was initially switched on using
the battery pack is switched off
using the remote control, the
temporary connection between
the connected battery pack and
the mobile dust extractor will be
32
lost. The battery pack can then
be connected again.
Once a connection has been es­
tablished between a remote con­
trol and the mobile dust extrac­
tor, the devices will remain con­
nected even when the mobile
dust extractor has been manual­
ly switched off.
Changing the remote control's bat­
tery [5]
The remote control is operated
using a CR 2032 battery.
If the battery compartment is
opened, we recommend that you
replace the seal (20 x 1.3 mm).