Problem
mobile dust ex
tractor.
The mobile dust
extractor does
not receive a sig
nal from a con
nected remote
control
Possible causes
The connection parameters
on the remote control and
mobile dust extractor no
longer match.
Remedy
then press and hold the
connection button [2-1] for
10 seconds until the flash
ing LED light goes out.
All devices saved in the ret
rofit receiver module are
deleted.
Resetting the remote con
trol
Hold down the connection
button [1-1] and the MAN
button [1-3] on the remote
control for 10 seconds.
The LED indicator flashes
purple if the reset has been
successful. The remote
English
39