Malfunction Remedy; Technical Data; Symbols On The Unit - Pontec PondoDrain Mud 8000 Instrucciones De Uso

Malfunction remedy

Malfunction
Pump does not start.
Pump switches off after a short running period.
The pump is running but is not delivering, or
the delivered quantity is insufficient

Technical data

PondoDrain Mud
Rated voltage
Rated frequency
Rated power
Protection class
Max. immersion depth
Pressure side connection
Minimum activation height / maximum deactivation height
Maximum activation height / minimum deactivation height
Minimum water level during start-up
Flow rate
Pumping head
Grain size
Power connection cable
Dimensions
Weight

Symbols on the unit

Disposal
NOTE
Do not dispose of this unit with household waste.

Dispose of the unit by using the return system provided for this purpose.

Render the unit unusable by cutting the cables.
Cause
Power supply interrupted
Overload protection has switched the pump off
due to overheating.
Pressure hose kinked
Intake blocked
Air in the pressure hose
If applicable:
Non-return valve incorrectly fitted in the pres-
sure hose or clogged
Impeller defective or worn
maximum
maximum
maximum
Length
Length
Width
Height
Watertight to 7 m depth.
Do not dispose of with normal household waste.
Read and adhere to the instructions for use.
8000
V AC 230
Hz 50
W 300
IP X8
m 6
G1
mm 320 / 140
mm 430 / 70
mm 85
l/h 8000
m 5
mm 25
m 10
mm 145
mm 155
mm 255
kg 3.8
Remedy
Check the fuse and electrical plug connections.
• Clean the intake and pressure hose.
• Allow the pump to cool down.
Route the pressure hose without kinks
•
Check the outlet and clean if necessary
•
Clean the intake
Expel the air from the pressure hose.
• Correctly fit the non-return valve.
Clean the non-return valve.
•
Replaced.
10000 15000
230 230
50 50
400 500
IP X8 IP X8
7 7
G1½ G1½
410 / 210 410 / 210
560 / 50 560 / 50
85 85
10000 15000
6.0 7.5
25 25
10 10
200 200
210 210
340 340
5.5 5.5
- EN -
19000
230
50
750
IP X8
7
G1½
410 / 210
560 / 50
85
19000
9.0
25
10
200
210
340
6.0
11