ENGLISH
Table of contents
1.0
2.0
Technical data .................................................... 34
3.0
Safety .................................................................... 36
4.0
Installation .......................................................... 36
5.0
Daily use ............................................................... 40
6.0
Service ................................................................... 41
7.0
Maintenance ....................................................... 42
8.0
9.0
10.0 Warranty .............................................................. 43
The lot number and year are marked
on a label on all our products. Write
this number in the place indicated.
If you need to contact your dealer,
you must always provide the serial
number and guarantee card/receipt
for the guarantee to be valid.
34
All manuals and user guides at all-guides.com
1.0 Relationship to the
authorities
Installation of a fireplace must be according to local codes and
regulations in each country.
All local regulations, including those that refer to national and
European standards, shall be complied with when installing the
product.
Before use read the Installation and Operating Instructions
carefully. We recommend that the installed product be inspected
by a qualified professional before use.
A heat-resistant rating plate is attached to the rear of the heat
shield. This contains information about identification and
documentation for the product.
2.0 Technical data
Material:
Finish:
Fuel:
Log length, max.:
Flue outlet:
Flue pipe dimension:
Weight with convection panels:
Weight with soapstone panels:
Dimensions, distances:
Technical data according to EN 13240:
Nominal heat output:
Recommended chimney draught: 13 Pa
Efficiency:
CO emission (13% O
CO emission (13% O
Operational type:
Intermittent combustion in this context means normal use of the
fireplace, i.e. fuel is added as soon as the fuel has burnt down to
a suitable amount of embers.
Cast iron
Black paint
Wood
30 cm
Top, rear
Ext: Ø 125 mm/min. 123
cm
cross section.
2
Int: Ø 114 mm / min. 102 cm
cross section.
Approx. 94 kg
Approx. 178 kg
See fig. 1
4 kW
77%
):
0.09%
2
1178 mg/Nm 3
):
2
Intermittent
2