Child Lock; Touch Control Safety Functions; Sensor Safety Cut Off - Sharp KH-6V09CS00-EU Manual De Uso

Child Lock

The purpose of the child lock functionality
is to lock the appliance in a complicated
multi-step process.
Child locking and unlocking is only
available in S-Mode.
First has to be pressed until the buzzer
beeps, then the the right and the left of
the slider button have to be pressed
for at least 0.5 sec, but for a max. of 1
second simultaneously. Following that,
the appliance can be locked the right of
the slider button. All 4 heaters display ´L`
is showed as a confirmation.
In the event the minute minder is still
running, it will proceed until ´00` is
reached and the timer will beep. After
confirmation of the timer running out, the
appliance will be fully locked. None of
the buttons can be used as long as the
appliance is locked.
The child lock is deactivated the same way
it was activated. After pressing
the beep sounds, then the right and the
left of the slider button simultaneously for
at least 0.5 second, followed by pressing
only the left. As confirmation for successful
unlocking, the ´L` symbol in the displays
will be erased immediately.
Stop & Go
The Stop & Go function is used for pausing
the operation of the heaters during
cooking.White heaters are in operation,
if Stop & Go
first time, all the heaters will be turned
off. After pressing
the heaters will be turned on.

Touch Control Safety Functions

The following safety functions are
available to avoid unintended operations
of the hob control.

Sensor Safety Cut Off

A sensor monitoring is included to prevent
the appliance from unwanted, random
sensor operation.
In the event one or more buttons are
pressed for longer than 12 seconds,
the sensor monitoring routine audibly
until
indicates that the wrong operation has
occurred (pot or other object placed on the
button, sensor failure, etc.) and switches
off the appliance.
EN - 14
button is pressed for the
for the first time, all