Electrolux EWIE08F3MMW Manual De Instrucciones página 17

31 electrolux how to use
Delay
Operation Method:
1. Press [Power] button;
2. Turn on the tap, put down the drain pipe.
3. Put in the washing load and detergent (Do not sprinkle the detergent on the
clothes directly, to avoid the clothes color fading), close the lid;
4. While selecting "Normal", "Soaking", "Jeans", "Baby Clothes" programs,
press [Delay] button, select the delay time, and then press [Start/Pause]
button to start the "delay" program. After "delay" started, the washing
machine will take the fuzzy weighting, and then start the"delay" timing. After
the fuzzy weighting finished, the washing machine can select the water level
within one min, after that, it will come into the formal"delay" status, the
buttons cannot be operated except [delay] button,[Power] button and [child
lock] button.
5. While selecting "Quick wash", "Blanket", "Delicates", "Clean Drum", press
Delay button, select the delay time, and then press Start/Pause button to
start the "delay" program. The buttons cannot be operated except Delay
button, Power button and "child lock" combination.
Notice: Long press Delay button, every 0.5s will increase 1 hour, and also
have a beep once, when after reach to 24 hours, it will return to the initial
state.
Child Lock
1. This function is effective only after program starts;
2. Press Start/Pause button to start the program, then press Rinse &
Program button at same time for seconds to start the child lock function. If
consumer wants to stop this function, they can re-press Rinse & Program
buttons at the same time.
No Drain (Rinse option)
After rinsing, keep the last rinsing water, and do not drain. No Drain function
can be selected only under the normal program, and need to have the rinsing
process (While consumer select the No drain function, there will be no draining
and spinning after the last rinsing, the water will be kept in the drum.)
All manuals and user guides at all-guides.com
Program Pause and restart
1. When program paused, all load closed, the controller will stop running;
2. When restart the program, the washing machine will run the program
before pausing.
Self-Power off function
1. After the program finished, the washing machine will power off
automatically;
2. If consumer selected the program but not press the Start/Pause button,
the washing machine will power off automatically after 10 min;
3. When alarm happened and was not released, the washing machine will
power off after 1 hour;
4. When consumer pressed the Start/Pause button during the running
process, and forgot to re-press it to continue the program, the washing
machine will power off after 1 hour.
Unbalance Control
1. During the spin process, and under the condition of safety switch
connected, if the sudden break happened, the washing machine will come
into the unbalance adjustment situation;
2. While coming into the unbalance adjustment process, the rinsing LED
flashed, inlet the water to reach to the set level, adjust the clothes' status,
drain after finished rinsing, and return to the normal spinning process. If it is
not effective after 3 times adjustment, there will be an alarm.
Power failure memory function
If the power supply becomes off suddenly during operation, the machine
remembers the current operation state . When power is on, the machine
returns to former operation state automatically.
how to use electrolux 32