Assign Default Numbers And Addresses; Ringing Tones, Images, And Call Text For Contacts; Copy Contacts - Nokia X6-00 Manual Del Usuario

44 Contacts

Copy contacts

Select the contact,
Add contacts to favorites
Tap and hold a contact, and select
Listen to the voice tag assigned to a contact
Select the contact and
Before using voice tags, note the following:
Voice tags are not language-dependent. They are dependent on the speaker's voice.
•
You must say the name exactly as you said it when you recorded it.
•
Voice tags are sensitive to background noise. Record voice tags and use them in a
•
quiet environment.
Very short names are not accepted. Use long names, and avoid similar names for
•
different numbers.
Note: Using voice tags may be difficult in a noisy environment or during an emergency,
so you should not rely solely upon voice dialing in all circumstances.

Assign default numbers and addresses

If a contact has several numbers or addresses, a default number or address makes it
easier for you to call or send a message to the contact. The default number is also used
in voice dialling.
1 Select Menu
2 Select a contact and
3 Select a default to which you want to add a number or an address, and select
Assign.
4 Select a number or an address you want to set as a default.
5 To exit the Defaults view and save the changes, tap outside the view.

Ringing tones, images, and call text for contacts

You can define a ringing tone for a contact or contact group, and an image and call text
for a contact. When the contact calls you, the device plays the selected ringing tone and
shows the call text or image (if the caller's phone number is sent with the call and your
device recognizes it).
Select Menu > Contacts.
44
Options > Copy, and the desired location.
Options Voice tag details
>
> Contacts.
Options > Defaults.
Add to favorites.
Options Play voice
> >
© 2009 Nokia. All rights reserved.
tag.