Remington MB450 Manual Del Usuario página 8

ENGLISH
Your beard trimmer cannot be overcharged. However, if the product is not going to be used
for an extended period time (2-3 months), unplug it from the mains and store. Fully recharge
your beard trimmer when you would like to use it again.
CORDED USE
Connect your USB cable to the USB port to the power adaptor and then to the electrical
socket.
Connect the USB cable to your beard trimmer
CAUTION: Extended mains only use will result in the reduction of the battery life.
HOW TO USE
BEFORE YOU BEGIN
Always comb your beard or moustache with a fine comb before you start trimming.
Adjusting the Trim Length
The trimmer comb can be adjusted to give you 9 different trim lengths simply by turning the
zoom wheel to the desired setting. Turn the zoom wheel clockwise for shorter length, anti-
clockwise for longer length. The wheel will click into place as it reaches each setting, and the
setting number will appear on the length position indicator.
SETTING
1
2
3
4
5
6
7
8
9
Note Trimmer comb must be attached to the groomer in order to use the hair length
selector.
TO THIN AND TAPER THE BEARD/MOUSTACHE
Use the zoom wheel to set the trimmer comb to the desired length setting. The setting
will appear on the length position indicator. If you are trimming for the first time start with
the maximum trimming length setting (9).
2
Эта инструкция скачана с сайта www.remington-shop.ru
HAIR DESCRIPTION
Stubble or cropped look
Short
Medium
Long
HAIR LENGTH
1 mm 0.06"
2.5 mm 0.1"
4 mm 0.16"
5.5 mm 0.22"
7 mm 0.28"
9 mm 0.35"
11 mm 0.43"
14 mm 0.55"
18 mm 0.71"