7.
Getting started
7.1.
Charging the battery
Use the supplied USB charging cable to connect the mini
USB charging port to your PC or notebook.
The charging LED on the headphones lights up red as soon
as charging begins.
Charge the headphone battery for at least three hours
while the headphones are switched off.
The LED turns off when the headphones are fully charged.
7.2.
Putting the headphones on
Open up the earpieces.
Set the headband length so that the headphones fit
comfortably on your head.
7.3.
Switching the headphones on/off
Press and hold the Bluetooth® button
sound and the Bluetooth/operating LED flashes blue.
The headphones are switched on and ready for connection
with a Bluetooth-enabled audio output device.
Immediately after being switched on, the head-
phones attempt to connect to the last device con-
nected before they were switched off.
To switch on the headphones, press and hold the Blue-
tooth® button
Bluetooth/operating LED turns off.
To completely switch off the headphones and pre-
vent unnecessary battery discharge, also disable
the noise suppression function.
44
until you hear a sound and the blue
until you hear a