Publicidad
Idiomas disponibles
Idiomas disponibles
Counterholding Wrench Set with changeable Pins
CONTENT
1
Counter-holding tool, length 400 mm
2
Nut, knurled
3
Pair of pins, Ø 6/10 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-compliance
of the safety instructions may lead to damage, personal injury and to termination of the warranty. Keep
these instructions in a safe and dry location for future reference. Enclose the operating instructions when
handing over the product to third parties.
INTENDED USE
This counter-holding tool is used to hold toothed belt wheels or chain sprockets on camshafts, diesel
pumps and crankshafts when loosening or fastening the central screw. The legs are adjustable in a range
of 40 - 220 mm.
SAFETY INFORMATIONS
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set.
• When using this tool, always wear safety glasses, anti-slip safety shoes and work gloves.
• Store the tool in a dry and safe location out of the reach of children.
APPLICATION EXAMPLES
ENVIRONMENTAL PROTECTION
Dispose of this product at the end of its working life environmentally. Recycle unwanted
materials instead of disposing of them as waste. All tools, accessories and packaging should
be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the
environment. Contact your local solid waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
4
Pair of pins, Ø 8/11 mm
5
Pair of pins, Ø 10/12 mm
6
Pair of pins, Ø 11/16 mm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 1714
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
