Intended Use; Technical Description - Waeco PerfectView VS200 Instrucciones De Uso

_VS200.book Seite 20 Donnerstag, 19. März 2009 2:22 14

Intended use

5 Intended use
PerfectView VS200 (item no. 9102200011) is a video splitter. One or two cameras can be
connected to a monitor using the VS200.
6

Technical description

The VS200 video splitter is used for extending an existing rear view video system. It has
two separate controllable camera inputs, enabling e.g. operation with a rear view and a
side camera or with two separate controllable cameras (for articulated buses, machine
monitoring etc.). The pictures can be displayed individually or side by side (split function).
Cameras which require different voltage can also be connected to one another.
Only one camera input is required on the monitor. The monitor can be automatically
activated via the corresponding control output.
The cameras are activated automatically with a control signal (e.g. reversing light,
indicator) or manually with a switch. In addition, with corresponding cameras a mirror
function can be switched on so that the monitor picture corresponds to a view in the rear
mirror.
The video splitter can be used with almost all WAECO cameras and monitors with PAL
video format using various adapters (accessories).
The video splitter can be connected to a 10 V to 32 V DC voltage supply.
Connections and controls
No. in
Designation
fig. 4, page 5
1 –
2 CA1
3 CA2
4 Monitor Out RCA Monitor output for cinch plug
5 Monitor Out DIN
6 Mirror S/W
20
Description
Socket for the power connection cable
6-pin mini DIN socket
Camera connection 1 (rear view camera)
6-pin mini DIN socket
Camera connection 2 (side camera)
yellow = video
white = audio
Monitor output for 6-pin mini DIN socket
DIP switch
Select mirror function (if available)
PerfectView