Waeco PerfectView VS200 Instrucciones De Uso página 23

_VS200.book Seite 23 Donnerstag, 19. März 2009 2:22 14
PerfectView
8.1 Adapting plug connections
VS200 adapts the voltage but not the plug connections. To adapt the different plugs and
sockets (e. g. 5-pin DIN plug to a 6-pin DIN socket) or to adapt WAECO systems with grey
and black cable systems, you must use the appropriate adapter cable.
The following adapter cables are available:
RV-60:
5-pin DIN plug to 6-pin mini DIN socket
RV-61:
6-pin mini DIN plug to 5-pin DIN socket
RV-ADAPT-RV-AMP:
– 6-pin mini DIN socket to 6-pin mini DIN plug
– Grey system cable (from camera) to RV-AMP/4
RV-ADAPT-RV-50:
– 6-pin mini DIN socket to 5-pin DIN plug
– Grey system cable (from camera) to GCT monitors
RV-ADAPT-RV20/M:
– 6-pin mini DIN socket to 6-pin mini DIN plug
– Camera RV-20/M and RV-20/CFM to grey system cable
Note
I
Only connect the RV-ADAPT-RV20/M adapter to RV-ADAPT-RV-AMP or
RV-ADAPT-RV-50 and vice-versa. These adapters are designed for connecting
grey system cables to WAECO reversing video systems that normally use a
black system cable and vice-versa.
RV-ADAPT-RCA:
Cinch sockets (yellow: video; red: audio) to 6-pin mini DIN plug (compatible with grey
system cable)
RV-ADAPT-RV2427:
– 6-pin mini DIN socket to 6-pin mini DIN plug
– Grey system cable (from the camera) to RV-SWITCH-SV for using the switchable
mirror function of RV-24, RV-27 and RV-27-T150 with the video splitter
RV-SWITCH-SV
Only connect the RV-ADAPT-RV2427 adapter in order to operate the cameras RV-24,
RV-27 and RV-27-T150 on the video splitter RV-SWITCH-SV. It enables the use of
the camera's mirror switch.
Connecting the video splitter
23