Error Messages - Casio WK-200 Guia Del Usuario

Ocultar thumbs Ver también para WK-200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WK200_e.book 74 ページ 2008年5月16日 金曜日 午後8時44分
Reference

Error Messages

Display
Message
Err CardFull
There is not enough room available on the SD
memory card.
Err Card R/W
The SD memory card is damaged.
Err Convert
There is not enough unused memory available to
save recorded song data to an SD memory card as an
SMF 0 format file.
Err Exist
A sampled drum set sound cannot be copied (page
E-21) to a keyboard key because the key already has
a sampled sound assigned to it.
Err Format
1. The format of the SD memory card is not
compatible with this Digital Keyboard.
2. The SD memory card is damaged.
Err Limit
The tone number you selected before starting
sampling already has the allowable maximum of eight
sampled sounds assigned to it.
Err Mem Full
1. There is not enough memory available to play back
song data from an SD memory card.
2. There is not enough memory available for sampling
or Auto Accompaniment editing.
Err No Card
1. The SD memory card is not set correctly in the card
slot.
2. The SD memory card was removed part way
through a card access operation.
Err No Data
There is no data in the selected user area (tone,
rhythm, song number, etc.)
Err No File
There is no folder named "MUSICDAT" on the SD
memory card.
Err NotSMF01 You are attempting to play back SMF Format 2 song
data.
Err Protect
1. The SD memory card is write protected.
2. Sampled sounds are protected.
Err ReadOnly
You are attempting to save a file using the same
name as an existing read-only file.
Err SizeOver
1. The song data on the SD memory it too big to play
back.
2. Auto Accompaniment editing cannot be performed
because the accompaniment pattern or instrument
part data is too large.
Err WrongDat 1. The data on the SD memory card is corrupted.
2. The data on the SD memory card is a type that is
not supported by this Digital Keyboard.
E-74
All manuals and user guides at all-guides.com
Cause
Action
• Delete some of the files on the SD memory card to
make room for new data (page E-63).
• Use a different SD memory card.
Use a different SD memory card.
Delete some or all of the following user data from
memory to make room for new data.
Sampled sounds (page E-17), user rhythms (page
E-42), user songs (page E-28)
• Delete the sampled sound that is currently assigned
to the key you are copying to (page E-22).
• Copy the sampled sound to another key that does not
yet have a sampled sound assigned to it.
1. Format the SD memory card (page E-60).
2. Use a different SD memory card.
• Delete the one or more of the sampled sounds
currently assigned to the tone number (page E-22).
• Select another tone number that has less than eight
sampled sounds currently assigned to it (page E-20).
Delete some or all of the following user data from
memory to make room for new data.
Sampled sounds (page E-17), user rhythms (page
E-42), user songs (page E-28)
1. Remove the memory card and reinsert it correctly
(page E-60).
2. Never remove a SD memory card from the card slot
while a card access operation is in progress.
Select a Digital Keyboard user area that contains data.
• Use a computer to create a folder named
"MUSICDAT" on the SD memory card (page E-62).
• Format the SD memory card on the Digital Keyboard
(page E-60).
Playback of SMF Format 0 or 1 only is supported.
1. Adjust the SD memory card's write protect switch to
enable data storage.
2. Unprotect one or more of the sampled sounds, which
will allow it to be overwritten or deleted.
• Save the new file to a different card or use another
name.
• Remove the read-only attribute of the exiting file on
the SD memory card and try again.
• Use a different SD memory card.
1. This Digital Keyboard can play back song data files
with a maximum size of about 320Kbytes.
2. Select a different accompaniment pattern or
instrument parts.

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Wk-500

Tabla de contenido