Year Warranty - Graef CM702 Manual De Instrucciones

Ocultar thumbs Ver también para CM702:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
The personal taste plays a role as well.
Choose a finer grinding degree setting for Espresso.
Choose a medium grinding degree setting for filter coffee.
Choose a coarse grinding degree setting for French Press.
Select a coarser grind setting if no coffee powder falls out of the ejector even though the
machine is running.
Room temperature / air humidity have an effect on the coffee beans.
The tendency for the correct grinding degree setting for Espresso can be seen by the fact that
the coffee grounds start to go lumpy. The coffee grounds are not too lumpy when dropping
out; smaller to medium-sized lumps are formed which spread again when dropping out. The
coffee grounds have a fine feel.
It is very important to find the right grinding degree for preparing coffee (extraction time). In
case of a wrong grinding degree, the coffee cannot be extracted in an ideal way. It is either
under or over extracted.
However, there is no "perfect grinding degree". Everyone should find his or her grinding
degree according to his or her taste preferences.
The setting of the grinding degree should also take into consideration the contact pressure
and the dosage as well as the roasting degree of the bean used. Some test grinds are ne-
cessary here. For this reason the contact pressure and the dosage should be kept constant;
the grinding degree should be attuned.
The finer the grinding degree, the longer the grinder needs.
It may happen that the grinding degree has to be corrected after some time because the
quality, the moisture content and the freshness of the bean depends very much on the sur-
roundings. This can be corrected quickly by trying out and adapting the grinding degree
and/or contact pressure, if the Espresso run into the cup too quickly or too slowly.

2 YEAR WARRANTY

As from the date of purchase we assume manufacturer warranty of twenty-four months for
defects which can be traced back to manufacturing and material defect. Your legal warranty
claim in conformity with Section 437 ff. of the German Civil Code (BGB) shall remain unaffec-
ted by this regulation. The guarantee does not cover any damage which is caused by incorrect
handling or use as well as defects which only slightly influence the function or the value of the
unit. Moreover, transport damage provided we are not responsible shall be excluded from the
claims under guarantee. Guarantee shall be ruled out for damage, the repair of which has not
been carried out by us or one of our representations. In case of justified complaints, we shall
repair the defective product or replace it by a product without defects at our discretion.
DE
EN
FR
NL
IT
ES
DK
SE
NO
PL
UKR
HU
25

Publicidad

Tabla de contenido
loading

Tabla de contenido