Control Keyboard-Display - Telstar Bio II Advance Serie Manual Del Usuario

4.5.

CONTROL KEYBOARD-DISPLAY

The following elements are found in the control keyboard:
A. On/Off Button
Pressing when the cabinet is turned off:
•
It goes to the Password Request screen. When entering the correct password (Chapter
4.5 point 1), it goes to the Main Operation screen.
Pressing when the cabinet is turned on:
•
It goes to the Password Request screen. When entering the correct password (Chapter
4.5 point 1), the cabinet switches off.
B. Navigation buttons
They move the cursor though all different function icons and select them. The icon
pointed inverts its colours. If the selected item is a numeric field, the navigation buttons
increase/decrease and validate the value.
C. Backlight graphic display (Annex 3 pos. 3):
It shows alarm messages, operating graphs, function icons and all the information
required in cabinet-user communication. The background colour changes to:
Green: Working mode. All the flows are working fine and there are no alarms
-
activated.
Red: Alarm mode. Any alarm has been activated or the cabinet is in unsafe mode. In
-
case of alarm, an acoustic alarm is activated together with the red light.
Yellow: U.V. mode. The U.V. lamp is switched on.
-
White-blue: Information mode. The cabinet is in safe mode although the flow is
-
disconnected.
Below is an explanation of the different system screens:
1. Password Request screen (by default 0000)
UM-BIOIIADVANCE-EN-1302
All manuals and user guides at all-guides.com
(Annex 3 pos. 1):
, and (Annex 3 pos. 2):
moves the selection to the next field. After
pressing for the final time, if the password is
correct, it accesses the Main Operation screen.
Increases the value of the selected field.
Decreases the value of the selected field.
Confirms the value selected in a field and
19