Mr Coffee frappe ICED + HOT Manual Del Usuario página 5

CLEAN COFFEEMAKER BEFORE
FIRST USE
Just follow these simple steps:
1. Wash the blender jar, blender lid, blender measuring cap,
tumbler, tumbler lid, straw, coffee filter, coffee scoop and brew
basket in a mixture of mild detergent and water. Rinse each
thoroughly.
2. Fill tumbler with water to the water line and pour into reservoir.
Replace brew basket in position and nylon filter (or paper 5-cup
basket style paper filter) into brew basket.
3. Position tumbler under brew spout, plug in unit and press HOT
BREW. Note: the unit is on when the LED is lit.
4. When brewing is complete, discard water from tumbler and rinse
tumbler thoroughly with clean water.
5. You Mr. Coffee Frappe™ Coffeemaker is now ready for use!
DISHWASHER SAFE PARTS OF YOUR
COFFEEMAKER
To thoroughly clean your coffeemaker, you can put the following parts
into the top-rack of the dishwasher
1. Blender jar
2. Reusable coffee filter
3. Brew basket
CAUTION: THE ELECTRICAL BASE, POWER CORD AND PLUG ARE
NOT DISHWASHER SAFE AND SHOULD NEVER BE IMMERSED IN
WATER OR OTHER LIQUIDS.
7.
LET'S MAKE FROZEN COFFEE!
1. Plug the coffeemaker in. Press power button. It will blink slowly in standby
for brew or blend.
2. Fill the blender jar
to the "WATER" marking with clean, filtered water.
13
3. Lift the lid 7 of the unit and pour the water into the reservoir.
4. Place the reusable coffee filter
(or standard 5-cup basket-style paper
9
filter) into the brew basket.
10
5. Using the ICED side of the coffee scoop
the reusable coffee filter . Close the lid.
9
6. Fill the blender jar with milk to the milk line (about 2 oz of milk).
13
7. Fill the blender jar 13 with ice cubes to the "ICE" marking.
8. Place the blender jar
13 full of ice and mix-ins under the brew spout
Press the "OVER ICE" button – ensure the LED is illuminated.
3
9. Wait 3-4 minutes for brewing to complete. Once dripping slows and stops,
grab blender jar from underneath the spout
13
coffee drips may come from the drip spout post brew – the drip tray
catch these and keep your countertop mess free.
10. Pour desired syrups, flavorings or mix-ins into the blender
• Syrup or sugar of some kind greatly impacts the frosty consistency of the
frappe. We recommend following one of our favorite recipes in the
recipe book!
• Use the blender cap as a measuring device to measure 1 tbsp, 2 tbsps., 3
tbsps., or ¼ cup.
11. Place the blender lid on the blender jar
14
blender mount. Twist handle to the left to lock into place.
12. Press the "BLEND" button. The blender will automatically blend your
frappe to the perfect consistency.
13. When blending is complete, remove lid
reusable tumbler or separate drinking vessel.
17
14. Insert the straw in lid, place on tumbler and enjoy!
19 18
6
, pour 2 scoop of grounds into
16
7
5
.
. Note: a few sparse
5
will
1
13 . Sweet tips:
. Place the blender jar on the
13
and pour your frappe into the
14
8.