Options
T
Z
™ option
URBO
ONE
(on some models)
Blasts into every corner to eliminate
the need for soaking and scrubbing of
dirty, baked-on dishes. For your
toughest items, use the T
URBO
option with the Pots Pans cycle. See
loading information.
High Temp
Raises the main wash temperature to
improve cleaning. When used with
the Normal Wash cycle this will
provide a little extra tough cleaning
capability, but not as much as the Pots
Pans cycle.
Sani Rinse
This high temperature option sanitizes
your dishes and glassware in
accordance with National Sanitation
Foundation (NSF)/ANSI Standard 184
for Residential Dishwashers. Certified
residential dishwashers are not
intended for licensed food
establishments. The Sani indicator
indicates at the end of the cycle
whether the Sani Rinse option was
successfully completed. If the
indicator does not activate it is
probably due to the cycle being
interrupted.
Heated Dry (on some models)
Turns the heat element on after the
wash cycle is completed. Use rinse
aid with or without the Heated Dry
option for best drying results. Plastic
items are less likely to deform when
loaded in the top dish rack.
The maximum additional water used for any combination of options is 2.1 gal. (7.9 L).
†
All manuals and user guides at all-guides.com
Can be selected
with
SmartWash
®
H E
Pots & Pans
Normal Wash
Z
™
ONE
SmartWash
®
H E
Pots & Pans
Normal Wash
SmartWash
®
H E
Pots & Pans
Normal Wash
Available with
any cycle
except
Quick Rinse
What it does
Directs all of the
cleaning power of the
dishwasher to the
TURBOZONE™ area
during certain times in
the wash cycle.
Raises the main wash
temperature from 105°F
(41°C) to 120°F (49°C).
Increases the main wash
temperature from 105°F
(41°C) to 120°F (49°C)
and the final rinse from
140°F (60°C) to 155°F
(68°C).
Turns the heat element
on at the end of the
wash cycle.
Added time to cycle
Gallons
Typical
Max
30
50
(0 - 11.2)
22
40
(0 - 11.2)
53
73
(0 - 11.2)
52
52
Added
Water
†
(Liters)
0 - 3.0
0 - 3.0
0 - 3.0
0
17