Publicidad
Idiomas disponibles
Idiomas disponibles
Dear customer,
congratulations on your choice of purchase: the IMER CONCRETE
MIXER, the result of years of experience, is a very reliable machine
equipped with all the latest technical innovations.
This OPERATING AND MAINTENANCE manual must be kept on site by
the person responsible for the worksite, e.g. the site foreman, and must
always be available for consultation.
The manual should be considered as being an integral part of the machi-
ne, and must be kept for future reference (EN 12100) until the machine
itself is disposed of. In the case of damage or loss it will be possible to
ask the manufacturer for another copy.
The manual contains important information regarding site preparation,
installation, machine use, maintenance procedures and requests for
spare parts. In any case, adequate experience and knowledge of the
machine is essential for maintenance personnel and the user.
To guarantee complete safety of the operator, safe operation and long
life of equipment, follow the instructions in this manual carefully, and
observe all safety standards currently in force for the prevention of
accidents at work. Use personal protection (safety footwear, suitable
clothing, gloves, goggles, etc.).
IMER INTERNATIONAL decline any responsibility in the case of non-
compliance with laws and standards governing the use of this equip-
ment. In particular: improper use, defective power supply, lack of main-
with instructions contained in this manual.
IMER reserves the right to modify the characteristics of the concrete
mixer and/or the contents of this manual without any obligation to upda-
te previous machines or manuals.
Table 1 - TECHNICAL DATA
Model
Cod.
1105600 - 1105601
Drum capacity
Mix capacity (approx.)
Effective output (approx.)
Drum speed
Direction of drum rotation
(view from loading mouth)
Wheel dimensions
Motor rating
Voltage
Current
Frequency
Motor rpm
Protection category
Overall dimensions
(width x length x height)
Machine weight
The SYNTESI 140 concrete mixer has been designed and manufactu-
red applying the following harmonised standards: EN 12151:2008; EN
12100; EN 60204-1:2006.
IMER INTERNATIONAL S.p.A.
SYNTESI 140 EL
Syntesi 140 EL
1105606 - 1105607
138 l
100 l
60 l
24 rpm
Anti-clock wise
Ø 200 x 50 mm
0.3 kW
230 V
220 V
2.2 A
2.5 A
50 Hz
60Hz
2.750 rpm
3360 rpm
IP 55
800x1330x1220 mm
54 Kg
Table 2 shows the sound pressure level measured loadless at the ope-
rator's ear (L
) and of the vibrations transmitted during operation.
PA
Model
-
Syntesi 140 EL
output shaft, locked in place by a special screw.
nected to the arm.
The electric motor is turned on and off by two special buttons on the
electrical supply.
unloaded).
The IMER concrete mixer has been designed for work on building sites
and does not have its own lighting, therefore the place of work must be
well lit (min. 300 lux).
tective devices in perfect conditions.
2. Do not use improvised and/or faulty power lines.
3. The connection lines on the site must be laid in such a way as
not to be able to be damaged. Do not place the concrete mixer on
the power cable.
4. Socket-plug connections must be placed in such a way as to
protection against splashes of water (IP67).
5. Repairs to the electric systems must be carried out by skilled
personnel only. Do not carry out adjustment or maintenance ope-
rations with the machine powered or moving.
The dual insulation cement mixer S 140 is manufactured in accordance
The cement mixer is also equipped with a safety device to
prevent accidental electrical contacts, with class II dual in-
sulation of all live parts. For this reason it does not require
to be earthed.
The risk of deterioration of the power cable to the electric motor due to
11
Table 3
Type of motor
L
pA
Electric
72 dB
GB
A
eq
2.14 m/s
2
-
-
-
-
-
-
Publicidad
