Enjoying Other Components - Sony HT-CT150 Manual De Instrucciones

1
Turn on the TV and choose a program.
Refer to the operating instructions of your
TV for details.
2
Turn the system on.
3
Press TV on the remote.
4
Adjust the volume by pressing
MASTER VOL +/–.
Tip
• The sound may be output from the TV's speaker. In
this case, turn the volume of the TV's speaker down
to minimum.
If you are using "BRAVIA" Sync
(System Audio Control)
You do not need to perform steps 2 and 3 above.
When you turn on the TV, the system is also
turned on, and the input source changes
automatically. You can also adjust the system's
volume using the TV's remote. If you turn off the
system, sound is output from the TV's speaker.
For details on setting "BRAVIA" Sync, see
"Preparing for "BRAVIA" Sync" (page 20).
Tip
• The system is not turned on when you turn the TV on
if sound was being output from the TV speakers the
last time the TV was turned off.
Enjoying other
components
Input
buttons
MASTER
VOL +/–
1
Play the connected component.
2
Turn on the system.
?/1
continued
17
US