Publicidad
Step 12
IMPORTANT: If you purchased the 419958 Hutch, fi nish drilling through the
å
four holes shown in the TOP (V) before fastening the UPRIGHTS (L and M).
NOTE: You will need someone's help in this step.
å
First, fi ll the holes in the LEGS (H, P, Q, and T) 1/4 to 1/2 full with GLUE (54M).
å
Then, insert four WOOD DOWELS (15F) into the holes. Wipe away the
excess GLUE.
Now, fi ll the exact four holes shown in the TOP (V) 1/4 to 1/2 full with
å
GLUE (54M).
Fasten the UPRIGHTS (L and M) to the TOP (V). Tighten four TWIST-LOCK®
å
FASTENERS.
NOTE: Be sure the WOOD DOWELS in the LEGS insert into the TOP. Wipe
å
away the excess GLUE.
The large hole
in the TOP (V)
should be here.
If you purchased the
419958 Hutch, fi nish
drilling through these
holes in the TOP before
fastening the UPRIGHTS.
Page 16
T
L
H
Q
M
V
Meet Part (V). This component has been
engineered to be lighter, stronger, faster...
well ok. Not technically faster. But defi nitely
makes for a sturdier Credenza that' s easier to
assemble and friendlier to the environment.
419959
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Fill the holes 1/4 to 1/2 full with GLUE.
If you purchased the
419958 Hutch, fi nish
drilling through these
holes in the TOP before
fastening the UPRIGHTS.
Electric drill
with 3/16" bit
P
15F
www.sauder.com/services
54M
(4 used)
Publicidad
