Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (12F) into the large holes in the ENDS (A
and B). Repeat this step for the BOTTOMS (F, G, and R)
and UPRIGHTS (L and M).
(20 used)
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
12F
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
419959
STOP
If you purchased
the 419958 Hutch,
assemble that unit
fi rst.
Page 5
Publicidad
