Grizzly Tools AKS 2040-21 T Lion Set Traducción Del Manual De Instrucciones Original página 65

Power tool use and care:
• Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
• Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous and
must be repaired.
• Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjust -ments, changing accessories,
or storing power tools. Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
• Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are dan-
gerous in the hands of untrained users.
• Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
• Use the power tool, accessories
and tool bits etc. in accordance with
these instructions, taking into ac-
count the working conditions and
the work to be performed. Use of the
power tool for operations different from
those intended could result in a hazard-
ous situation.
• Carefully inspect the area to be cut and
remove all wires or other foreign bodies.
• Hold the power tool only on the in-
sulated handle surfaces, as the saw
chain can come into contact with
concealed power lines. Contact be-
tween the saw chain and a live wire can
make metal parts of the equipment live
and cause an electric shock.
Careful handling and use of battery
devices
• Charge the batteries only in chargers
that are recommended by the manu-
facturer. Risk of fire if a charger that is
suitable for a specific type of battery is
used with other batteries.
• In the power tools, use only the bat-
teries designed for the purpose. The
use of other batteries may result in inju-
ries and risk of fire.
• Keep the unused battery away from
paper clips, coins, keys, nails, screws
and other small metal objects, which
could cause bridging of the contacts.
A short circuit between the battery con-
tacts may cause burns or fire.
• If used incorrectly, liquid may leak
from the battery. Avoid contact with
this. In the event of accidental con-
tact, rinse off with water. If the liquid
gets into eyes, seek medical assis-
tance. Leaking battery fluid may cause
skin irritations or burns.
Service:
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
GB
65