Sony HT-CT660 Manual De Instrucciones página 25

3
Start playback on the
BLUETOOTH device.
For details on operation, see "To
control a BLUETOOTH device"
(page 13).
4
Adjust the volume.
Set the volume of the BLUETOOTH
device to a moderate level and
press VOL +/.
Tips
 You can adjust the volume of the
system via a BLUETOOTH device
supporting AVRCP (Audio Video
Remote Control Profile) VOLUME UP/
DOWN. For details, refer to the
operating instructions supplied with the
device.

You may not be able to adjust the
volume, depending on the device.
Notes
 If the source device has a bass boost
function or equalizer function, turn
them off. If these functions are on,
sound may be distorted.

In the following cases, you will have to
make the BLUETOOTH connection
again.
 The power of the system is not on.
 The power of the BLUETOOTH device
is not on, or the BLUETOOTH function
is off.
 The BLUETOOTH connection is not
established.

If more than one devices paired with the
system are playing, sound will be heard
from just one of those devices.
Finishing the BLUETOOTH
connection
Terminate the BLUETOOTH
connection by any of the operations
listed below.
 Operate the BLUETOOTH device to
terminate the connection. For
details, refer to the operating
instructions supplied with the device.
 Turn off the BLUETOOTH device.
 Turn off the system.
25
US