CHIEF iCSPTP2 Instrucciones De Instalación página 13

Installation Instructions
3
2
3
All manuals and user guides at all-guides.com
INSTALL HEAD ASSEMBLY TO WALL PLATE
1. Align head assembly (A) with wall plate (B) and slide into position.
NOTE:
Display not shown for clarity.
A
WARNING:
may allow head assembly (A) to fall, resulting in serious personal injury or
damage to equipment! Hex head screw should fully recede into head
assembly hole after tightening.
2. Using hex key (R), tighten hex head screw in head assembly (A)
ensuring that screw engages one of three holes in wall plate (B).
1
NOTE:
Three holes are provided in wall plate (B) to provide height
adjustment.
3. Align cover (C) with grooves in wall plate (B) and slide into position.
4. Align caps (D) with holes in wall plate (B) and slide into position.
B
2
Failure to align hex head screw with hole in wall plate (B)
3 C
B
iCSPTP2
4
D x2
B
13