Wood Stud Installation - CHIEF iCSPTP2 Instrucciones De Instalación

iCSPTP2
1
1
x2
x2
2
1/8" (3.2mm)
B
3
1
10
All manuals and user guides at all-guides.com
G x2
INSTALL WALL PLATE TO WALL

Wood Stud Installation

WARNING:
Failure to provide adequate structural
strength for this component can result in serious
personal injury or damage to equipment! It is the
installer's responsibility to make sure the structure to
which this component is attached can support five
times the combined weight of all equipment.
Reinforce the structure as required before installing
the component.
1. Level wall plate (B) and mark locations of pilot holes.
2. Drill 1/8" (3.2mm) diameter pilot holes into wood
stud.
3. Install screws (G) through wall plate (B) into wood
stud.
Installation Instructions