Disassembly Procedures; Removing The Top Cover; Removing The Footstand - Hitachi DV-P250U Manual De Servicio

Disassembly Procedures

Removing the Top Cover

1. Remove the two screws from each side of the machine and the three screws from the rear side.
.
2. Gently pull out the top cover from both sides of the machine.
.
3. Slide out the top cover lightly until it clicks to let it out from the front panel. Then, lift it up and move away
from the machine.
.

Removing the FootStand

1. Release the screw from the footstand, then remove the footstand..
Chapter 2
All manuals and user guides at all-guides.com
29