METRIA M51 Benchtop Conductivity/TDS Meter
Introduction
Thank you for selecting the METRIA M51 becnhtop Conductivity/TDS meter. This manual provides a step-by-step guide to help you operate
the meter, please carefully read the following instructions before use.
Unpacking
Before unpacking, ensure that the current work environment meets following conditions.
•
Relative humidity is less than 80 %.
•
Ambient temperature is greater than 0°C and less than 60°C.
•
No potential electromagnetic interference.
The following list describes the standard components of the meter. After the unpacking, please check all components are complete. If any
are damaged or missing, please contact nearest distributor.
METRIA M51 Conductivity/TDS Meter
TP-10K Temperature Probe
Electrode Arm
DC9V Power Adapter
CON-1 Conductivity Electrode
1