Basic Operation Of Built-In Cd Player; Switching The Display; Eject; Disc Loading Slot - Pioneer DEH-P4150 Manual De Instrucciones

Basic Operation of Built-in CD Player

Switching the Display

Each press of the DISPLAY button changes
the display in the following order:
Playback mode (Play time) = Disc Title
Note:
• If you switch displays when disc titles have
not been input, "NO TITLE" is displayed.

Disc Loading Slot

Note:
• The Built-in CD player plays one standard 12 cm or 8 cm (single) CD
at a time. Do not use an adapter when playing 8 cm CD.
Track Number Indicator

Track Search and Fast Forward/Reverse

• You can select between Track Search or Fast Forward/Reverse by pressing
the 2/3 button for a different length of time.
Track Search
Fast Forward/Reverse
Note:
• If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Press the
EJECT button and check the disc for damage before reinserting it.
• If a CD is inserted with the recorded side up, it will be ejected automatically after a few moments.
• If the Built-in CD player cannot operate properly, an error message (such as "ERROR-14")
appears on the display. Refer to "Built-in CD Player's Error Message" on page 41.
• The Built-in CD player is not equipped with CD TEXT function.
• A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name and
Track Title.
All manuals and user guides at all-guides.com
Play Time Indicator
0.5 seconds or less
Continue pressing

Eject

Note:
• The CD function can be turned
ON/OFF with the disc remaining in
this product. (Refer to page 6.)
• A disc left partially inserted after
ejection may incur damage or fall out.
8