PNI ENT-ACC 25 Manual De Usuario página 6

in accordance with local regulations.
• To unpack the photovoltaic modules from the original packaging, first
remove the box cover (after removing the fastening straps, if provided).
Remove the photovoltaic modules one by one by sliding them up the
channel in the package (see figure below). It may be necessary to fix the
remaining photovoltaic modules in the pallet packaging to prevent them
from falling.
The surfaces of photovoltaic modules are likely to suffer damage that could
affect the performance or safety of the photovoltaic module. Do not damage
or scratch the surface of the PV module and do not apply paint or adhesive to
any of the surfaces, including the frame.
For your safety, do not disassemble or modify the photovoltaic modules in any
way. This may affect performance or cause irreparable damage and will void
any applicable warranty.
If photovoltaic modules need to be stored before installation, photovoltaic
modules must remain inside the package and be protected from exposure to
User manual 6