Getting Started; Main Unit - Technoline WS9480 Manual Del Usuario

3. Outdoor Thermo Sensor
D1: Transmission Indication LED
D2: Outdoor Temperature display
D3: Outdoor Humidity display
D4: Wall Mount Hole

4. Getting Started:

4.1 Main Unit:

Open main unit battery compartment cover [C1]

Insert 2 x AA batteries observing polarity [ "+" and " –" marks]

Replace main unit battery compartment cover

Use a pin to press the RESET [B5] button on the rear of the main unit, the main unit is now ready for

use
4.2 Outdoor Thermo Sensor
Batteries compartment (D6) of thermo sensor is locating behind the back cover,

Insert 2 x AAA batteries observing polarity [ "+" and "–" marks]

5. Installation
5.1 Main Unit
The main unit can be placed onto any flat surface.
5.2 Outdoor Thermo sensor
The remote sensor should be securely mounted onto a horizontal surface.
Note: Transmissions between receiver and transmitter can reach up to 100m in open area. Open
D5: "C/F" button
D6: Battery Compartment
D7: Stand
EN3