Lithium­ion Battery Status Display; Items Supplied; Rotary Hammer; Lithium­ion Batteries - Hilti TE 2-A18 Manual De Instrucciones

▶ Observe the national health and safety requirements.
▶ To reduce the risk of injury, use only genuine Hilti tools and accessories.
▶ Use only the Hilti lithium-ion batteries from the B22 series for this product.
▶ Do not use the battery as a power source for other unspecified appliances.
3.3 Lithium­ion battery status display
When a lithium-ion battery is used, the charge status can be displayed by tapping one of the battery release
buttons.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED blinks.
Note
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery charge status LEDs blink, please refer to the information
given in the Troubleshooting section.

3.4 Items supplied

Rotary hammer, side handle, depth gauge, operating instructions.
Note
For safe, reliable operation, use only genuine Hilti spare parts and accessories.
accessories and consumables approved by Hilti for use with this product can be found at your Hilti
Center or at www.hilti.com.
4 Technical data

4.1 Rotary hammer

Rated voltage
Weight
Single impact energy
Drilling diameter range in concrete/masonry (hammer drilling)
Drilling diameter range in metal (solid-head drill bit)
Maximum length of the depth gauge
4.2 Lithium­ion batteries
Battery
Rated voltage
Capacity
Weight
Meaning
• Charge status: 75 % to 100 %
• Charge status: 50 % to 75 %
• Charge status: 25 % to 50 %
• Charge status: 10 % to 25 %
• Charge status: < 10 %
B 18/1.6 Li­Ion
21.6 V
1.6 Ah
1.06 lb
(0.48 kg)
B 18/2.6 Li­Ion (02)
21.6 V
2.6 Ah
1.06 lb
(0.48 kg)
Spare parts,
TE 2­A18
21.6 V
6.0 lb
(2.7 kg)
1.5 J
1/8 in ... 5/8 in
0 in ... 3/8 in
7 in
B 18/3.3 Li-Ion
21.6 V
3.3 Ah
1.72 lb
(0.78 kg)
5