Li­ion Battery Display - Hilti ST 1800-A22 Manual De Instrucciones Original

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a hand-held cordless screwdriver for fastening profile metal sheets, metal sheets
and sandwich panels in metal construction. The product is designed for driving and removing self-drilling
and self-tapping screws in appropriate materials and material thicknesses.
It is possible to use a stand-up tool for driving collated screws.
▶ Use only Hilti Li­ion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Items supplied
Metal construction screwdriver, ST­DG 19 depth gauge, ST­DC protective cap, S­NSD 8 screwdriving bit,
operating instructions.
Spare parts, consumables and accessories approved by Hilti for use with the product can be found at
your local Hilti Store or online at: www.hilti.group.
3.4 Li­ion battery display
The charge status of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge status of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
16 English
Printed: 05.06.2019 | Doc-Nr: PUB / 5070730 / 000 / 07
1
@
;
=
%
&
(
)
+
§
/
:
∙
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Chuck
Protective cap
Torque adjustment
Power tool / accessory interface (snap-on
connection)
Pressure transfer surface
Grip
Lockbutton
Release button with additional function
(charge status display activation)
Control switch
Forward / reverse switch
Depth gauge
Depth gauge adjustment
439718
*439718*