Troubleshooting; Commercial Guarantee - Magnusson 3663602850854 Manual Del Usuario

Troubleshooting

Problem
No display
Cleaning
• To ensure the instrument operates at optimal performance it
should be regularly cleaned.
•
• The housing can be cleaned with a damp cloth, taking care
that no water enters the product.
• DO NOT immerse the electrical/optical parts of the product in
• Any lenses can be cleaned using a cotton bud with a small
amount of distilled water or alcohol.
• After cleaning, ensure that all parts dry properly before use.
• The product should be stored carefully, so that it is protected
from dust and scratches.

Commercial guarantee

ranges of products incorporating design and durability. That's why we offer a 5 year guarantee against manufacturing defects on our
Infrared Thermometer.
receipt or purchase invoice. Please keep your proof of purchase in a safe place.
The guarantee covers product failures and malfunctions provided the Infrared Thermometer was used for the purpose for which it is
contained above and in the user manual. This guarantee does not cover defects and damage caused by normal wear and tear of
the Infrared Thermometer and damage that could be the result of improper use, faulty installation or assembly, neglect, accident
If the Infrared Thermometer is defective during the guarantee period, then we reserve the right, at our discretion, to replace the
This guarantee only applies to the country of purchase or delivery and is not transferrable to any other countries. This guarantee is
non-transferrable to any other person or product. Relevant local law will apply to this guarantee. This guarantee is in addition to and
does not affect your statutory rights relating to faulty goods as a consumer.
Thermometer from.
SAAM10589 Laser Measuring tool IM/SM (IMn23) A5 v5 R.indd 7
Possible cause
Dead battery
Low battery
The target temperature is lower then
measuring range
The target temperature is higher than
measuring range
Solution
Check and replace battery
Check and replace battery
Choose target within the range
Choose target within the range
H O
2
7
31/07/2017 13:24