Reversing The Door Swing - EAS ELECTRIC EMR44VNI1 Manual De Instrucciones

2.6 Reversing the door swing

2.6.1. Reversing the door swing (cross handle)
1) Remove the right upper hinge shaft (1) and door.
2) Remove 3 screws (2) from the upper hinge on the right side and the
upper hinge (3). Remove 3 plastic caps (4) on the left side, remove 2 screws
(5), and the sleeve (6) from the air cover (7). Remove 2 screws (8) and the
door support (9). Remove the 3 screws (10) from the lower hinge, the lower
hinge (11) and the lower hinge shaft (12).
15 V.1