EAS ELECTRIC EMR44VNI1 Manual De Instrucciones página 41

5) Install the door, and fix the upper hinge shaft (1). Thus, the door reverse is
finished. Keep the right upper hinge (3) for future use.
2.6.1. Reversing the door swing (longitudinal handle)
Dismantle the shaft hole cap
part of the glass door assembly, and dismantle screws (3), the door light
switch block (4), the door stopper (5) and screws, and the lower sleeve
(6) of the lower part of the assembly.
and the upper sleeve
17
of the upper
V.1