Kobalt KMS 1040-03 Manual Del Usuario página 13

Ocultar thumbs Ver también para KMS 1040-03:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE AND MAINTENANCE
d. Fold the cutting line in half and hook the folded
end of the cutting line as shown in Fig. 6b.
e. Wind the line, in two even and tight layers,
onto the spool retainer.
NOTICE: Failure to wind the line in the direction
indicated will cause the trimmer head to operate
incorrectly.
f.
Place the ends of the line in two opposite
eyelets (Fig. 6c).
g. Align the two tabs on the spool base with
the slots on trimmer head and press it until it
snaps into place (Fig. 6d).
NOTICE: Make sure that the tabs on the spool
base snap into place, otherwise the spool will
come out during operation.
6b
Spool
retainer
6c
13
Eyelets

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

380989841328504665016

Tabla de contenido